PE series centrifuge

PE series centrifuge is specially designed for plant extraction and has the functions of airtight, explosion-proof and clean. The PE series centrifuge adopts a flat-bottom drum structure, with larger volume, higher cleanliness, and pollution-free structural design. It is loved by consumers for its simple operation, clean appearance, and stable performance.
Working Principle:
Fill the filter bag with the ground plant material and place it into the machine. Then, add alcohol until the plant material is submerged, and set the program to rotate in both directions to fully extract the active ingredients in the plant. The bottom valve is opened to release the extraction liquid, and the plant material is rotated and dried at high speed to remove as much liquid as possible. The alcohol wash is then processed further.

Features:
1. Low temperature: The acceptable low temperature is -70℃ to 70℃.
2. Large sight glass structure: Large sight glass structure allows you to clearly view the situation inside the equipment.
3. Fully automatic and manual: Fully automatic extraction process, the program can set the forward and reverse rotation speed of the drum, time and number of cycles, and can switch to manual control.
4. Adjustment: dehydration speed and time can be set.
5. Display: temperature display. Vacuum pressure display.
6. Single-person operation: Zippered filter bag can be quickly loaded and unloaded. Designed for single-person operation.
7. Optional configuration: There are also optional configurations: oxygen content detection and protection system, cart structure.

Product configuration
1. The parts in contact with the material (including the main shaft and the bottom of the drum) are made of SUS304 or SUS316L, with hygienic surface treatment and no dead corners.
2. The liquid inlet and liquid outlet adopt sanitary quick-connect interfaces with sight buckets and valves. All seals are made of PTFE or fluorine rubber, and the main shaft is a double-layer water seal/oil seal.
3. Three-phase 220V explosion-proof motor (optional 220V single-phase/three-phase power supply), PLC and touch screen control, frequency conversion control cabinet.
4. Equipped with two liquid inlet/air inlet pipes, a vacuum interface with valve, a liquid drain port, and coolant inlet and outlet. The cylinder has a cooling sleeve. The base is equipped with four lifting rings for easy loading and unloading.
5. It is equipped with 10m cable and control line randomly, which can be used for power connection.